產品明細

TW5387

智慧型 GNSS 天線;高精度;IMU;ST TESEO V(Quectel LG69TAP)

    產品簡述
    ♦ 採用多頻段 ST TESEO V GNSS 接收器晶片組(Quectel)的增強抗噪性能
    ♦ 機載慣性測量單元(UDR 和 ADR - 輪速)可在訊號遺失期間提供持續可用性
    ♦ 採用雙饋 L1/L5 Accutenna® 技術,提升多路徑抑制性能
    ♦ 多頻段GNSS接收機對電離層誤差有較強的穩健性
    ♦ 採用大型星座陣列實現高可靠性定時
    ♦ 卓越的職位表現,無需矯正服務即可獨立完成
    ♦ RTK流動站相容於Point One Navigation Polaris RTK和Swift Navigation Cx RTK等商業RTK服務
    ♦ 寬電壓範圍:5V-36V
    ♦ RS-422差分訊號或RS-232訊號
    ♦ 工業級 IP67 外殼
    ♦ 堅固的固定式安裝
    ♦ 多種電纜長度(5公尺、15公尺和25公尺)
    ♦ 可配備錐形雷達罩


    <<產品型錄>>

      產品詳細介紹Product Introduction

      TW5387 Smart GNSS Antenna; High Precision; IMU; ST TESEO V (Quectel LG69TAP)


      The TW5387 is a multi-band (L1/L5), multi-constellation integrated GNSS receiver/antenna with Inertial Measurement Unit (IMU) (for Untethered Dead Reckoning) and RTK for Precise Point Positioning. The TW5387 is capable of providing sub 1 meter accuracy stand alone, and 1 cm accuracy with with RTK corrections. Combined with the IMU to achieve Sensor Fusion, TW5387 supports the most demanding positioning applications in the most challenging environments such as a dense urban canyon.


      Interference Resilience
      The TW5387 incorporates a latest generation multi-band (L1/L5) GNSS receiver and IMU with a Tallysman Accutenna® multi-band (L1/L5) dual feed patch. The state of the art GNSS receiver supports concurrent tracking of three major constellations (GPS, BeiDou, and Galileo) in multiple frequency bands. The multi-band (L1/L5) architecture is highly effective method for the removal of ionospheric error. The TW5387 employs multi-stage filtering with low noise figure LNAs, combined with the dual feed Accutenna®, which greatly improves the rejection of multi-path signal interference. The IMU Sensor Fusion with GNSS data and optionally speed data further mitigates effects of severe multi-path reflections and provides continuous position availability during periods of GNSS signal obstruction offering exceptional performance to meet the most challenging precise positioning applications.


      Real Time Kinematic Positioning

      The TW5387 offers support Real-Time Kinematic base/rover corrections allowing performance optimization to sub 1 cm. The concurrent multi-band (L1/L5) access to three satellite constellations improves the receiver’s convergence capability to deliver a quick, precise and reliable position solution which is unaffected by ionospheric errors, and improved resilience to jamming. The TW5387 accepts RTK RTCM messages from a base station to act as a rover in RTK mode, and includes IMU. The TW5387 provides sub 1 cm positioning accuracy in conjunction with applied RTK corrections.

      Features:

      Antenna
      ArchitectureMulti-band (L1/L5), Dual Feed
      Axial RatioL1: < 1 dB typical.
      FrequenciesGPS L1C/A L5, GAL E1 E5a, BDS B1l B2a, QZSS L1C/A L5
      Interface
      Pwr, Gnd
      33-5387-07-yy-zzData, Timepulse: RS-422 levels
      33-5387-27-yy-zzData: RS-232; Timepulse: RS-422
      Serial Protocol
      OutputNMEA 0183, UBX Binary, RTCM v3.3
      Baud RateConfigurable
      Update Rate10 Hz
      Mechanical
      Dimensions66.5 mm dia. x 21 mm H
      Weight135 g
      Mounting MethodIndustrial grade fixed Mount
      Cable Length5, 15, 25m with RJ45 termination
      Electrical
      Voltages5 V to 36 VDC
      Current0.5 Watts (nominal operating) Measured @ 5VDC supply
      Environmental
      Operating Temperature-40℃ to +85℃
      Storage Temperature-40℃ to +85℃
      WeatherproofIP69K
      ShockVertical axis 50G,other axis 30G 3 axis sweep – 15 min
      Vibration10-200 Hz log sweep 3G
      Sensitivity
      Tracking & Nav -160 dBm
      Reacquisition-153 dBm
      Cold starts-145 dBm
      Acquisition Time To First Fix
      Cold start36 sec
      Aided start10 sec
      Reacquisition3 sec
      Horizontal Posistion Accuracy (4 Constellations)
      Standard PVT1.0 m CEP
      Corrected RTK0.01m + 1ppm CEP
      RTK Convergence10 sec*
      Timing
      Timing Accuracy100 ns RMS