產品明細

TW5365

多星座智慧 GNSS 天線,附 UDR

    產品簡述
    ♦ 包含整合式 3D 感測器的完整定位解決方案
    ♦ 在人口密集的城市和覆蓋區域內的定位精度
    ♦ 無需與汽車連接任何感測器
    ♦ 5V-36V汽車操作
    ♦ 優異的多路徑訊號抑制能力
    ♦ RS422/485差分訊號
    ♦ 工業級 IP67 外殼
    ♦ RS-485差分訊號
    ♦ 工業級 IP67 外殼
    ♦ 符合 RoHS、REACH、RED 標準 / CE 標誌


    <<產品型錄>>

      產品詳細介紹Product Introduction

      TW5365 Multi-Constellation Smart GNSS Antenna with UDR


      The TW5365 is a multi-constellation GNSS Receiver/Antenna
      fused with inertial sensor data. It is an easy-to-use tracking
      solution that enables high performance positioning in places
      where GNSS signals are poor or not available.

      The TW5365 incorporates a latest generation GNSS receiver that
      supports simultaneous GPS/GLONASS/Galileo reception and a
      Tallysman’s Accutenna™ patch antenna. This dual feed antenna
      greatly improves rejection of multi-path signal interference,
      making it the most precise antenna for tracking in dense urban
      environments.


      Untethered Dead Reckoning (UDR)
      TheTW5365 Untethered Dead Reckoning (UDR) technology
      provides continuous navigation without requiring speed
      information from the vehicle. This innovative technology brings
      the benefits of dead reckoning to installations previously
      restricted to using GNSS alone, significantly reducing the cost of
      installation for Dead Reckoning applications.

      The strength of UDR is particularly apparent under poor signal
      conditions, where it brings continuous positioning in urban
      environments, even when the antenna is installed within the
      vehicle. Useful positioning performance is also available during
      complete signal loss, for example in parking garages or short
      tunnels. UDR positioning starts as soon as the ignition signal is
      applied and before the first GNSS fix is available.

      The TW5365 may be installed in any position in a vehicle without
      electrical connection to the vehicle speed sensor. The on-board
      accelerometer and gyroscope sensors result in a self-contained
      UDR which is self calibrating and provides reliable and consistent
      navigation.

      A Timepulse output generates pulse trains synchronized with
      GPS or UTC time grid with intervals configurable over a wide
      frequency range.

      Antenna
      ArchitectureDual Feed
      Axial Ratio< 1 dB typical.
      FrequenciesGPS/QZSS L1 C/A, GLONASS L10F BeiDou B1I, Galileo E1B/C
      SBAS L1 C/AWAAS, EGNOS, MSAS, GAGAN
      Channels72-channel u-blox M8 engine
      Interface
      Pwr, Gnd, Ignition Input
      Tx, RXRS422 (RS485) Half-Duplex
      TimepulseRS232 level
      Mechanical
      Dimensions66.5 mm dia. x 21 mm H
      Weight135 g
      Mounting MethodFixed Mount
      Cable Length5 m with RJ45 termination
      EnclosureIndustrial grade fixed mount weatherproof IP69
      Electrical
      Voltages5 V to 36 VDC
      Current<500 mW nominal operating
      Environmental
      Operating Temperature-40º C to +85º C
      Storage Temperature-45º C to +85º C
      WeatherproofIP69
      ShockVertical axis 50G,other axis 30G
      3 axis sweep – 15 min
      Vibration10-200 Hz log sweep 3G
      Sensitivity
      Tracking & Nav-160 dBm
      Cold starts-148 dBm
      Hot starts-157 dBm
      Acquisition
      Cold start26 sec
      Aided 3 sec
      Reacquisition<1 sec
      Position
      Position Accuracy1.5m CEP (w/SBAS)
      UDR Position ErrorTypically <10% of distance covered
      without GNSS (up to 60 s)
      Serial Protocol
      OutputNMEA 0183
      Baud RateConfigurable
      Update RateUp to 30Hz (via HNR)