產品明細

RTE1000

示波器

產品簡述

♦ 測試頻寬: 200 MHz to 2 GHz
♦ 取樣率: 5 Gsample/s
♦ 最大記憶深度: 200 Msample
♦ 垂直解析度: up to 16-bit
♦ MSO: 16 digital channels, optional, retrofittable

詢價

產品詳細介紹Product Introduction

AT A GLANCE

Truly uncompromised in performance and impressively user-friendly – that’s the R&S®RTE oscilloscope.

With bandwidths from 200 MHz to 2 GHz and top performance parameters, the R&S®RTE oscilloscopes set standards in their class:
► Highest sampling rate of 5 Gsample/s and deepest memory of 200 Msample for accurate acquisition of long signal sequences
► Acquisition rate of more than one million waveforms/s for finding signal faults quickly
► Extremely low-noise frontends and 16-bit vertical resolution in high definition mode for precise results
► Highly accurate digital trigger system with virtually no jitter for triggering on smallest signal details in realtime

Tools such as QuickMeas, fast mask tests, powerful spectrum analysis, history function and 77 automatic measurement functions are supplied as standard. Results are available fast thanks to hardware-assisted implementation of the measurement tools in the Rohde&Schwarz ASIC. The results are based on a large number of waveforms to provide statistically conclusive information.

R&S®RTE oscilloscopes support dedicated application solutions for complex analyses, including trigger and decoding options for serial protocols and a power analysis option. The mixed signal option provides 16 digital channels for analyzing logical components in embedded designs.

The powerful R&S®RTE is impressively easy to use thanks to its high-resolution 10.4" XGA touchscreen.

R&S®RTE oscilloscopes offer a fully integrated multidomain test solution with time, frequency, protocol and logic analysis functions. This one-box solution makes it possible to quickly detect errors even in complex designs.

From embedded design development to power electronics analysis to general debugging, the R&S®RTE oscilloscopes handle everyday T&M challenges quickly, accurately and easily.

Available Models	Bandwidth	Channels	Sample rate	Max. Memory depth	Optional MSO
R&S®RTE1022	200 MHz	2	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1024	200 MHz	4	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1032	350 MHz	2	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1034	350 MHz	4	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1052	500 MHz	2	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1054	500 MHz	4	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1102	1 GHz	2	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1104	1 GHz	4	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1152	1.5 GHz	2	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1154	1.5 GHz	4	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1202	2 GHz	2	5 Gsample/s	200 Mpts	16 digital channels
R&S®RTE1204	2 GHz	4	5 Gsample/s	200 Mpts	16 digital channels

Features:

MORE CONFIDENCE IN MEASUREMENT RESULTS
- One million waveforms/s
- Very low inherent noise of 100 µV at 1 mV/div and 1 GHz
- Full measurement bandwidth up to 2 GHz, even at 500 µV/div
- Up to 16-bit vertical resolution
- Memory up to 200 Msample
- Minimal trigger jitter < 1 ps
- Trigger hysteresis can be adjusted to signal quality
MORE FUN TO USE
- High-resolution 10.4" XGA touchscreen
- Optimized for touchscreen operation
- Drag&drop signals and measurement results flexibly on the screen
- Results are only two clicks away thanks to powerful toolbar
- Convenient tools such as QuickMeas, fingertip zoom and undo/redo
MORE FUNCTIONS AND FASTER RESULTS
- Even in its basic configuration, the R&S®RTE offers a decisive edge when performing everyday measurement tasks:
- 77 automatic measurement functions including statistical evaluation
- QuickMeas for eight results at the push of a button
- History function for looking back in time
- Powerful FFT-based spectrum analysis
- Mask test for identifying signal anomalies
LOGIC ANALYSIS: FAST AND PRECISE TESTING OF EMBEDDED DESIGNS
- Every R&S®RTE can be turned into a mixed signal oscilloscope
- 16 digital channels
- 400 MHz, 5 Gsample/s sampling rate and 100 Msample memory
- More than 200000 waveforms/s
- Wide range of trigger capabilities with 200 ps resolution
- Many analysis tools such as history function and bus display as analog waveform
SERIAL PROTOCOLS: EASY TRIGGERING AND DECODING
- Easy configuration with the app cockpit
- Hardware-assisted triggering and decoding
- Color-coded telegram data display in honeycomb diagram or in a table
- Support of standard CAN-dbc and FIBEX formats
- Triggering and decoding of Manchester and NRZ coded serial protocols
- Simultaneous decoding of up to four serial buses
- Comprehensive search functions for easy analysis of long signal sequences
POWER ANALYSIS
- Analysis of input and output as well as the transfer function of switched-mode power supplies
- Measurement wizard for fast results
- Documentation of results at the push of a button
- Harmonic current analysis in line with conventional EN, MIL and RTCA standards
SPECTRUM ANALYSIS
- Multichannel spectrum analysis
- Display of change in power and frequency over time
- Frequency analysis with logarithmic display
- Fast results with automatic peak list measurement
- Outstanding RF performance due to high dynamic range and low inherent noise of the analog frontend
- Correlation of time and frequency analysis with numerous analysis functions
EMI DEBUGGING: TESTING DURING DEVELOPMENT
- High input sensitivity and dynamic range for reliable detection of unwanted emissions
- Powerful FFT function with information on the frequency of occurrence of spectral components
- Gated FFT for easy correlation between frequency and time
- Mask test in the frequency range for targeted analysis of sporadic emissions
INTEGRATED ARBITRARY WAVEFORM GENERATOR
- Every R&S®RTE can be enhanced to include a 100 MHz arbitrary waveform generator
- Single-ended and differential interface stimulation
- Test your device with native signals
HIGH DEFINITION: SEE MORE WITH 16-bit VERTICAL RESOLUTION
- 16-bit vertical resolution
- Sharper waveforms for more signal details and even more precise analysis results
- Realtime triggering on smallest signal details
- No aliasing
EXTENSIBLE FOR FUTURE APPLICATIONS
- On-site configuration of hardware options
- Software applications can be upgraded on demand
- Always remains up-to-date thanks to firmware updates
- POWERFUL PROBES
- Comprehensive probe portfolio for all measurement tasks
- High signal fidelity thanks to excellent specifications
- R&S®ProbeMeter with 0.01% measurement accuracy
- Active probes with micro button for instrument control

Specifications:

Specifications in brief
Vertical system
Number of channels	R&S®RTE1022/1032/1052/1102/1152/1202	2
	R&S®RTE1024/1034/1054/1104/1154/1204	4
Analog bandwidth (–3 dB) at 50 Ω	R&S®RTE1022/1024; R&S®RTE1032/1034; R&S®RTE1052/1054; R&S®RTE1102/1104; R&S®RTE1152/1154; R&S®RTE1202/1204	≥ 200 MHz;≥ 350 MHz; ≥ 500 MHz;≥ 1 GHz; ≥ 1.5 GHz;≥ 2 GHz
Rise time	R&S®RTE1022/1024; R&S®RTE1032/1034; R&S®RTE1052/1054; R&S®RTE1102/1104; &S®RTE1152/1154; R&S®RTE1202/1204	< 1.75 ns; < 1 ns; < 700 ps; < 350 ps; < 233 ps; < 175 ps
Impedance		50 Ω ± 1.5%, 1 MΩ ± 1% \|\| 16 pF ± 1 pF (meas.)
Input sensitivity	max. bandwidth in all ranges	50 Ω: 500 µV/div to 1 V/div; 1 MΩ: 500 µV/div to 10 V/div
Resolution		8 bit (7-bit ENOB)
	with high definition mode	16 bit
Acquisition system
Realtime sampling rate		max. 5 Gsample/s on each channel
Acquisition memory	per channel/1 channel active	R&S®RTE 2-channel model: 50/100 Msample; R&S®RTE 4-channel model: 50/200 Msample
Acquisition rate		> 1000000 waveforms/s
Decimation modes	any combination of decimation mode and waveform arithmetics	sample, peak detect, high resolution, root mean square
Waveform arithmetics		off, envelope, average
Horizontal system
Timebase range		50 ps/div to 5000 s/div
Timebase accuracy	after delivery/calibration	±2 ppm
Channel deskew		±100 ns
Trigger system
Trigger types		edge, glitch, width, runt, window, timeout, interval, slew rate, data2clock, pattern, state, serial pattern, TV/video, serial bus trigger (optional)
Sensitivity	definition of trigger hysteresis	can be set automatically or manually from 0 div to 5 div
Analysis and measurement functions
Automatic measurements		77 measurement functions
Cursor measurements		2 cursor sets, each consisting of two horizontal and two vertical cursors
Waveform mathematics		4 math waveforms; mathematics, logical operations, comparison, FIR filter, FFT
MSO option
Digital channels		16 (2 logic probes)
Input impedance		100 k \|\| 4 pF
Sampling rate		5 Gsample/s per channel
Acquisition memory		100 Msample per channel
Parallel buses		up to 4
General data
Dimensions	W × H × D	427 mm × 249 mm × 204 mm (16.81 in × 9.8 in × 8.03 in)
Weight	without options, nominal	8.6 kg (18.96 lb)
Screen		10.4" LC TFT color touchscreen, 1024 × 728 pixel (XGA)
Interfaces		1 Gbit/s LAN, 4 × USB 2.0, GPIB (optional), DVI for external monitor, external trigger, trigger output