產品明細

NGP800

電源供應器

產品簡述

♦ 最大輸出功率: 800W
♦ 每通道最大輸出電壓: 32V或64V
♦ 每通道輸出最大電流: 10或20A
♦ 電壓最高達250V(串聯), 電流最高達80A(並聯)
♦ 觸控大螢幕

詢價

產品詳細介紹Product Introduction

Boost your efficiency with quadcore power

The R&S®NGP800 DC power supply series, comprising five models with 400 W or 800 W, provides maximum power at a variety of operating points. The two or four 200 W outputs can each supply up to 64 V or up to 20 A. Electrically equivalent and galvanically isolated outputs can be wired in series or parallel for up to 250 V or 80 A. Synchronizing your outputs, performing waveform tests and logging data for in-depth analysis – all this becomes easy with the R&S®NGP800 power supply series
An intuitive operating concept and a large touchscreen allow you to enter values much faster and to display statistics in real time. All R&S®NGP800 power supplies include sense terminals, USB and a LAN interface. A user-installable GPIB interface, a digital trigger I/O, an analog input and a wireless LAN interface are optional, making these instruments great on the bench or in an automated test system.

Available models
Models	Number of output channels	Max. output power	Output voltage per channel	Output current per channel
R&S®NGP802	2	400 W	0 V to 32 V	0 A to 20 A
R&S®NGP804	4	800 W	0 V to 32 V	0 A to 20 A
R&S®NGP814	4	800 W	Ch 1, Ch 2: 0 V to 32 V Ch 3, Ch 4: 0 V to 64 V	Ch 1, Ch 2: 0 A to 20 A Ch 3, Ch 4: 0 A to 10 A
R&S®NGP822	2	400 W	0 V to 64 V	0 A to 10 A
R&S®NGP824	4	800 W	0 V to 64 V	0 A to 10 A

Features

Full flexibility
- 5" high-resolution touch display
- FlexPower
- Four power supplies in a single instrument
- Parallel and serial operation

Full functionality
- Ramp function
- Output delay
- Arbitrary function
- Remote sensing
- Built-in measurements
- Data logging

Full safety
- Protection functions
- Safety limits
- Safe working environment

Full connectivity
- Digital remote control
- Digital trigger I/O
- Analog input

Specifications

Electrical specifications
Outputs	The channel outputs are galvanically isolated and not connected to ground.
Number of output channels	R&S®NGP802, R&S®NGP822	2
	R&S®NGP804, R&S®NGP824, R&S®NGP814	4
Total output power	R&S®NGP802, R&S®NGP822	max. 400 W
	R&S®NGP804, R&S®NGP824, R&S®NGP814	max. 800 W
Maximum output power per channel		200 W
Output voltage per channel	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	0 V to 32 V
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	0 V to 64 V
Maximum output current per channel	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	20 A
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	10 A
Maximum voltage in serial operation	R&S®NGP802	64 V
	R&S®NGP822, R&S®NGP804, R&S®NGP814	128 V
	R&S®NGP824	250 V
Maximum current in parallel operation	R&S®NGP822	20 A
	R&S®NGP802, R&S®NGP824, R&S®NGP814	40 A
	R&S®NGP804	80 A
Voltage ripple and noise	20 Hz to 20 MHz	< 3 mV (RMS), < 30 mV (V_pp) (meas.)
Current ripple and noise	20 Hz to 20 MHz	< 3.5 mA (RMS) (meas.)
Load regulation	load change: 10% to 90%
Voltage	±(% of output + offset)
	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	< 0.01% + 5 Mv
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	< 0.01% + 10 mV
Current	±(% of output + offset)	< 0.01% + 5 mA
Load recovery time	50% to 100% load change to within 0.2% of rated voltage	< 400 µs (meas.)
Rise time	10% to 90% of rated output voltage, resistive load
	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	< 10 ms
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	< 12 ms
Fall time	90% to 10% of rated output voltage, resistive load
	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	full load: < 10 ms, no load: < 50 ms
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	full load: < 25 ms, no load: < 50 ms
Programming resolution
Voltage		1 mV
Current		0.5 mA
Programming accuracy
Voltage	±(% of setting + offset)
	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	< 0.05% + 5 mV
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	< 0.05% + 10 mV
Current	±(% of setting + offset)
		< 0.1% + 5 mA
Output measurements
Measurement functions		voltage, current, power, energy
Readback resolution
Voltage		1 mV
Current		0.5 mA
Readback accuracy
Voltage	±(% of output + offset)
	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	< 0.05% + 5 mV
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	< 0.05% + 10 mV
Current	±(% of output + offset)
		< 0.1% + 5 mA
Temperature coefficient (per °C)	±(% of output + offset), +5°C to +20°C and +30°C to +40°C
	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	voltage: < 0.0075% + 0.75 mV, current: < 0.015% + 0.75 mA
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	voltage: < 0.0075% + 1.5 mV, current: < 0.015% + 0.75 mA
Remote sensing
Maximum sense compensation		1 V (meas.)
Ratings
Maximum voltage to ground		250 V DC
Maximum counter	voltage voltage with the same polarity connected to the outputs
	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	35 V
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	70 V
Maximum reverse	voltage voltage with opposite polarity connected to the outputs	0.4 V
Maximum reverse current	for 5 min max.	20 A
Remote control
Command processing time		< 6 ms (typ.)
Protection functions
Overvoltage protection		adjustable for each channel
Programming resolution		1 mV
Overpower protection		adjustable for each channel
Overcurrent protection (electronic fuse)		adjustable for each channel
Programming resolution		0.5 mA
Response time	(I_load > I_resp× 2) at I_load ≥ 2 A	< 1 ms
Fuse linking (FuseLink function)		Yes
Fuse delay at output-on	adjustable for each channel	10 ms to 10 s (1 ms increments)
Fuse delay time	adjustable for each channel	10 ms to 10 s (1 ms increments)
Response time for linked channels		< 5 ms
Overtemperature protection		independent for each channel
Special functions
Output ramp function		EasyRamp
EasyRamp time		10 ms to 60 s (1 ms increments)
Output delay
Synchronicity		< 1 ms (typ.)
Delay per channel		10 ms to 10 s (1 ms increments)
Arbitrary function		QuickArb
Parameters		voltage, current, time
Maximum number of points		1024
Maximum number of subgroups		8
Dwell time		1 ms to 60 s (1 ms increments)
Repetition		continuous or burst mode with 1 to 65535 repetitions
Trigger		manually, by remote control or via optional trigger input
Trigger and control interfaces	R&S®NGP-K103	digital I/O, 16-pin connector block
Trigger response time		< 3 ms (typ.)
Maximum voltage (IN/OUT)		5.5 V
Input trigger level		TTL
Maximum drain current (OUT)		5 mA
Analog control interface	R&S®NGP-K107	analog input, 16-pin connector block
Input voltage	0% to 100% control of voltage or current	0 V to 5 V
Output accuracy	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	voltage: < 0.1% + 16 mV, current: < 0.1% + 30 mA
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	voltage: < 0.1% + 32 mV, current: < 0.1% + 15 mA
Temperature coefficient	(per °C) ±(% of output + offset), +5°C to +20°C and +30°C to +40°C
	R&S®NGP802, R&S®NGP804, R&S®NGP814 (CH1, CH2)	voltage: < 0.015% + 2.4 mV, current: < 0.015% + 4.5 mA
	R&S®NGP822, R&S®NGP824, R&S®NGP814 (CH3, CH4)	voltage: < 0.015% + 4.8 mV, current: < 0.015% + 2.25 mA
Update rate		1 ms
Data logging
Maximum acquisition rate		125 sample/s
Memory depth		800 Mbyte internal or external memory
Voltage resolution		see readback resolution
Voltage accuracy		see readback accuracy
Current resolution		see readback resolution
Current accuracy		see readback accuracy
Display and interfaces
Display		TFT 5" 800 × 480 pixel WVGA touch
Front panel connections		4 mm safety sockets (channel outputs, remote sensing)
Rear panel connections	R&S®NGP802, R&S®NGP822	8-pin connector block (channel outputs and remote sensing)
	R&S®NGP804, R&S®NGP824, R&S®NGP814	2 × 8-pin connector block (channel outputs and remote sensing)
Remote control interfaces	Standard	USB-TMC, USB-CDC (Virtual COM), LAN
	R&S®NGP-K102	WLAN
	R&S®NG-B105	IEEE-488 (GPIB)
General data
Environmental conditions
Temperature	operating temperature range	+5°C to +40°C
	storage temperature range	–20°C to +70°C
Humidity	Noncondensing	5% to 95%
Power rating
Mains nominal voltage		100 V to 250 V
Mains frequency		50 Hz to 60 Hz
Maximum power consumption	R&S®NGP802, R&S®NGP822	650 W
	R&S®NGP804, R&S®NGP824, R&S®NGP814	1125 W
Mains fuses	internal (not user accessible)	16 A 250 V IEC60127-2/7 fast acting
Product conformity
Electromagnetic compatibility	EU: in line with Radio Equipment Directive 2014/53/EU	applied standards: ► ETSI EN300328 V2.1.1 ► EN61326-1 ► EN61326-2-1 ► EN55011 (Class A) ► EN55032 (Class A) ► ETSI EN301489-1 V2.2.0 ► ETSI EN301489-17 V3.2.0
	Korea	KC mark
	USA, Canada	FCC47 CFR Part 15B, ICES-003 Issue 6
Electrical safety	EU: in line with Low Voltage Directive 2014/35/EU	applied harmonized standards: EN61010-1
	USA, Canada	UL61010-1, CSA C22.2 No. 61010-1
WLAN approvals	Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom	CE
	Singapore	iMDA standards DB102020
	USA, Canada	FCC, IC
RoHS	in line with EU Directive 2011/65/EU	EN50581
Mechanical resistance
Vibration	Sinusoidal	5 Hz to 55 Hz, 0.3 mm (peak-to-peak), 55 Hz to 150 Hz, 0.5 g const., in line with EN60068-2-6
	Random	8 Hz to 500 Hz, acceleration: 1.2 g (RMS), in line with EN60068-2-64
Shock		40 g shock spectrum, in line with MIL-STD-810E, method 516.4, procedure I
Mechanical data
Dimensions	W × H × D	362 mm × 100 mm × 451 mm (14.25 in × 3.94 in × 17.76 in)
Weight	R&S®NGP802, R&S®NGP822	7.5 kg (16.5 lb)
	R&S®NGP804, R&S®NGP824, R&S®NGP814	8.0 kg (17.6 lb)
Rack installation	R&S®ZZA-GE23	19 in, 2 HU
Recommended calibration interval	operation 40 h/week over entire range of specified environmental conditions	1 year