The 17 formats of component signals are provided for DTV conforming to ISDB, ATSC, and DVB standards based on 1920 1080, 1280 720, 720 480, and 720 576 formats. The NTSC/PAL/SECAM composite output and VGA, used for a computer monitor, are provided. These 29 formats are suitable for production line applications of projectors, etc.
Two component signal formats (i.e., G, B, R/Y, PB, PR) can be selected
CS (tri-level or binary level), HD, and VD sync signals are output.
Monoscope pattern (i.e., 16:9 for HDTV, 4:3 for SDTV interlace, 16:9(S) for SDTV progressive) suitable for inspecting resolution is provided as standard for the format applicable to DTV.
Since an S connector is provided to output Y/C separation signals, this instrument is suitable for adjusting and inspecting an equipment with S connector. The S connector identifies S1 and S2 signals.
The D5 output conforming to JEITA CP-4120 standards is provided as standard.
Up to 100 setting conditions of formats and patterns can be stored.
This instrument can be remotely controlled by using a personal computer.
The address to be recalled can be incremented or decremented by grounding the remote connector pin.
The digital signal generator produces highly stable and accurate signals (except audio signals).
DVI-D connector conforming to DDWG standards is provided as standard.
The test patterns generated are monoscope, color bar, crosshatch, gray scale, circle, character, and much more.